Buy all your VW California Accessories at the Club Shop Visit Shop
The Bench seat?I found this under our bench seat - it looks to be a wheel - can anyone confirm where it might have come from?
View attachment 81281
View attachment 81282
It's from the slide out table. If you lift the table up you will see at the hinged edge there is one at each side, which helps it slide along the rail. We had the same issue, just screwed it back on and all has been good since.I found this under our bench seat - it looks to be a wheel - can anyone confirm where it might have come from?
View attachment 81281
View attachment 81282
A bit of threadlock might help if the issue does ever recurIt's from the slide out table. If you lift the table up you will see at the hinged edge there is one at each side, which helps it slide along the rail. We had the same issue, just screwed it back on and all has been good since.
I screwed them in quite tight and the table still slides okay.I was surprised how much movement there is on the part attached by the wheels which I noticed the other day.
Can these wheels just be tightened by hand or it it supposed to be a flexible joint?
I know I haven't described this very well.
The top nut doesn’t seem to “lock” so just rotates for me once I get to a certain torque.I screwed them in quite tight and the table still slides okay.
Is it tight enough or still loose. Could be the threads are damaged, you could try some ptfe tape or thread lock on it.The top nut doesn’t seem to “lock” so just rotates for me once I get to a certain torque.
The VW California Club is the worlds largest resource for all owners and enthusiasts of VW California campervans.