Boxes for under multiflex board

[Jonathan Duke]

Hi do you know what sizes these boxes are and do you have a link to where you purchased them

Thanks Martyn

Hi Martyn! I purchased from Cromwell-Direct

 

[Crell]

I bought the same ones that @Jonathan Duke has posted ( I'm guessing it was your post I saw months ago and blatantly copied ) . They fit perfectly underneath the MF. No regrets at all.

One of the lids was cracked on arrival but Cromwell replaced it without any questions.

https://www.cromwell.co.uk/shop/sto...s/euro-containers/f/12305?query=storage boxes

 

[Scottedog]

What boxes do you use to fit under the multiflex board?

I measured the available space, it's 109cm wide, 43 to 48cm high, and the depth depends on the bench location, but in the location that touches the full multiflex board, it's about 73cm minimum.

So I've been looking around, and currently selected these as best: http://www.ikea.com/be/nl/catalog/products/10280203/
I think the 34x54x21cm boxes would allow exactly 8 of these to fill up the space: 108cm wide, 42cm high, 68cm deep.

Only problem: they're not transparent. Which is nice if you have to identify what box holds what.

What boxes are others using?

 

[Scottedog]

What boxes do you use to fit under the multiflex board?

I measured the available space, it's 109cm wide, 43 to 48cm high, and the depth depends on the bench location, but in the location that touches the full multiflex board, it's about 73cm minimum.

So I've been looking around, and currently selected these as best: http://www.ikea.com/be/nl/catalog/products/10280203/
I think the 34x54x21cm boxes would allow exactly 8 of these to fill up the space: 108cm wide, 42cm high, 68cm deep.

Only problem: they're not transparent. Which is nice if you have to identify what box holds what.

What boxes are others using?

 

[BikesandOcean]

Thanks for the advice @zeratul - Here's mine to match.

View attachment 18775

have you used the same size boxes