Strange Favour

[MichaelB]

I know this may sound strange but would someone with a T6 mind measuring the gap between the bottom of the drawer under the sink and the top of the shelf lip when the shelf is in the upper most position (the one that gives space for the porta potty underneath.

We've seen some nice camping plates and bowls but don't know if they will fit when our T6 arrives.

Thank you in anticipation.

 

[DM]

Well - it's never quite that simple in a Cali .

With the shelf in the top position a bottom of the drawer front to the top of the shelf lip is 120mm. To the shelf itself is 139mm. But the drawer runner mechanism protrudes slightly lower than the drawer itself - so at the sides you lose about 3mm from the above measurements.

We normally have our shelf in the middle position which would give you an additional 32mm clearance.

Hope that helps.

 

[MichaelB]

Well - it's never quite that simple in a Cali .

With the shelf in the top position a bottom of the drawer front to the top of the shelf lip is 120mm. To the shelf itself is 139mm. But the drawer runner mechanism protrudes slightly lower than the drawer itself - so at the sides you lose about 3mm from the above measurements.

We normally have our shelf in the middle position which would give you an additional 32mm clearance.

Hope that helps.

Thanks DM Very helpful and appreciated. What is more I think we can fit what we want to.

Cheers